KNEHO-LACKE has been successfully established on the market for many years as a supplier to the parquet industry. The entire product portfolio is available to you with highly modern property profiles. Super matt and scratch-resistant surfaces as well as hybrid oils are one of our main focuses alongside UV-2K hand fillers. In addition, the focus is on process improvement so that scrap rates and rework times are reduced to a minimum through optimized coating systems and system settings.
KNEHO-2K-UV-HAND-FILLER is used for filling knots and cracks. The material is characterized by a long pot life and very good adhesion. The surface can then be oiled, painted or stained.
The KNEHO-HYDRO-FASSE VARNISH "ANTIDROP" is applied once to the bevel of laminates. The bevel lacquer insulates and strengthens the HDF fiber in the edge area and enables maximum water resistance.
The entire profile can be impregnated with the vacuum coating without negatively affecting the click installation.
KNEHO-INVISIBLE-TOUCH-OXI-OIL is usually applied as the first layer on oak to generate an oiled surface that suggests the look and feel of an unvarnished surface.
KNEHO-NATURAL-UV-OIL is applied twice with a lacquer application roller and hardened under UV radiation. The surface is naturally oiled and can be refreshed with all commercially available care products.
KNEHO-NAWARO-UV-OIL FOR ROLLER COATING is an innovative product made from 90% renewable sources, which significantly improves the eco-balance of your products.
The KNEHO-UV-EXCIMER-TOPCOAT GLOSS 3 is applied once as a thin top coat and cured using excimer technology. The result is a unique, velvety, matt and transparent surface with an anti-fingerprint effect.
KNEHO-UV-INDUSTRIAL-FLOOR-COATING is particularly suitable for panel materials used in industrial production halls. The coating is also particularly suitable for conductive substrates. After curing, the coating has a particularly abrasion-resistant surface for heavy-duty use.
The KNEHO-UV-HEAVYPUTTY is applied once with a large excess on pre-calibrated surfaces and completely removed again with the steel roller. Microcracks, wind cracks and defects in the gluing are filled, after which the material can be sanded or brushed for surface coating.
The KNEHO-BIOUV-COUNTER COATING prevents boards, laminate and vinyl from banding when coated on one side. The counter-tension force is freely adjustable and moisture absorption is also reduced. The product is primarily made from bio-based and recycled materials.
